New generation cables for: 1080P,HD-SDI, AHD, CVI, TVI and Analogue. A new design that separates video and power cables for convenient power, better video quality, and minimal interference saving you precious time on installation! Our Video + Power BNC cable allows you to connect your digital video recorder and security cameras without the need for a costly additional power cable.

We recommend that you run the power through the cable to the camera to prevent ‘Ground Looping’.
Ground Looping: This is an inset from a search engine result for 'Ground Looping'.
In CCTV, ground loops can be seen as hum bars (bands of slightly different brightness) scrolling vertically up the screen.
Low current wiring is particularly susceptible to ground loops. If two pieces of audio equipment are plugged into different power outlets, there will often be a difference in their respective ground potentials. If a signal is passed from one to the other via a video connection with the ground wire intact, this potential difference causes a spurious current through the cables, creating an video buzz at the AC mains base frequency (50 or 60 Hz) and the harmonics thereof (120 Hz, 240 Hz, and so on), called mains hum.

Features:
* 5 in 1 Video and Power Cable for CCTV system - SDI AHD CVI TVI and Analogue.
* Plug and play ready
* Video AND power connectors
* Suitable for both indoor and outdoor use
* Low power consumption

Specification:

* Mini coaxial cable 75Ohm: 0.32BC+1.6Foam PE+AL foil+32/0.12CCA+3.1PVC

* Power: 7/0.15BC+1.2PVC+16/0.1BC+3.0PVC
* Connector: BNC-BNC (Male-Male); DC-DC (Male-Female)
* Sheathing material: PVC* Impedance: 9 Ohm
* Inner conductor Insulation: PE
* Inner conductor material: bare copper
* Operating Temperature: 0℃ - 60℃

Colors:
Black
White